Danfoss 088U0215 지침 - 페이지 5

{카테고리_이름} Danfoss 088U0215에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss 088U0215 16 페이지. Cf-rf room thermostat with infrared floor sensor

Instruction

2. Installation

Note: Assignment of Room Thermostats to Master Controller

should be within a distance of 1.5 m.

Activate Install mode on Master Controller (fig. 1)

• Use the menu selection button  to select the Install

mode. Install LED  flashes.

• Activate Install mode by pressing OK. Install LED 

goes ON.

Activate Install mode on room thermostat

• Press the push button . LED  and  flicker during

communication.

Select output on Master Controller

• All available output LEDs on Master Controller  light

up, and the first one flashes.

• Press output selection button  to select desired

output (flashes). Accept with OK .

• All output LEDs  go OFF. Selected output stays ON

shortly.

Room thermostat installation status

• Satisfactory: LED  goes OFF.

• Not satisfactory: LED  flashes 5 times.

Note: A room thermostat can be assigned to several outputs

if needed by repeating the installation process.

CF-RF Room Thermostat with Infrared Floor Sensor

VIUHR402

Danfoss Heating Solutions