Danfoss DEVIreg 233 설치 매뉴얼 - 페이지 7

{카테고리_이름} Danfoss DEVIreg 233에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss DEVIreg 233 12 페이지.

DEVIreg™ 233

3. Mount and reassemble the thermostat. The thermo-

stat is to be installed in a flush-mounting box or a

surface-mounting box for the FUGA design.

• Put the unit back in place and tighten the screws in

each side to fasten the thermostat.

• Press the front cover back in place.

4. Turn on the power supply.

Settings

Please be aware of the following:

• The floor temperature is measured where the sen-

sor is placed.

• The temperature of the bottom of a wooden floor

can be up to 10 degrees higher than the top.

• Floor manufactures often specify the max tem-

perature on the top surface of the floor (usually

27-28˚C).

• Always use a floor sensor to control floor heating.

Installation Guide