Danfoss EFET 160 설치 지침 매뉴얼 - 페이지 2

{카테고리_이름} Danfoss EFET 160에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss EFET 160 12 페이지.

Application

EFET 160 is an electronic thermostat designed for regulating heat and

cold from -10˚C to +50˚C .

EFET 160 is moisture proof (IP 44) so it can be used in moist rooms

and outdoors .

EFET 160 has a built-in 2-pole switch, so an external switch is not

necessary .

EFET 160 is supplied with a NTC sensor of 2 .5 m cable . The sensing cable

can be extended up to 50 m with 1 .5 mm² installation cable without

affecting the accuracy of the thermostat . However, the cable must not

be placed parallel to high voltage cables as undesirable signals may be

induced . The installation must be permanent . The thermostat must be

connected by an authorized electrician .

VIFZK102

02/2007