Danfoss EFET 160 Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Termostat Danfoss EFET 160. Danfoss EFET 160 12 stron.

Application

EFET 160 is an electronic thermostat designed for regulating heat and

cold from -10˚C to +50˚C .

EFET 160 is moisture proof (IP 44) so it can be used in moist rooms

and outdoors .

EFET 160 has a built-in 2-pole switch, so an external switch is not

necessary .

EFET 160 is supplied with a NTC sensor of 2 .5 m cable . The sensing cable

can be extended up to 50 m with 1 .5 mm² installation cable without

affecting the accuracy of the thermostat . However, the cable must not

be placed parallel to high voltage cables as undesirable signals may be

induced . The installation must be permanent . The thermostat must be

connected by an authorized electrician .

VIFZK102

02/2007