Danfoss FH-CWD 지침 - 페이지 8
{카테고리_이름} Danfoss FH-CWD에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss FH-CWD 16 페이지.
페이지 인쇄
9. Technical Specifications
Feature
Approval
Colour
Dimensions
Adjustment mode
Programmable
Fault indication/
failure mode
Frost protection
Ambient
temperature
Precision
Hysteresis
IP class
LCD backlight/
nightlight
8
VI.CU.B2.02
Instruction FH-CWD Thermostat
Description
CE Marking, EN 60730
White RAL 9016
86 x 99 x 19mm
Push buttons
No
If room sensor failure, E1 will
be displayed. If floor sensor
failor, E2 will be displayed.
In any case, thermostat will
turn off all output of relays.
Yes, if enabled:
< 5 °C heating on
> 7 °C heating off
- 10 °C – 60 °C
±1 °C
1 °C, symmetrical around
the setpoint temperature
30
Yes
Produced by Danfoss Floor Heating Hydronics 05.2011