Danfoss FP975 설치 매뉴얼 - 페이지 4
{카테고리_이름} Danfoss FP975에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss FP975 16 페이지. 7 day electronic programmer with separate outputs for heating & hot water, which can be set at independent times.
Danfoss FP975에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 지침 (2 페이지)
페이지 인쇄
1.0 Installation Guide
Please Note:
This product should only be installed by a qualifi ed electrician or
competent heating installer and should be in accordance with the
current edition of the IEEE wiring regulations.
2.0 System Overview
GB
Specifi cation
Power supply
Switching action
Switch rating
Battery back-up
Timing Accuracy
Setting/Running Accuracy
Max. Ambient Temperature
Dimensions, mm (W, H, D)
Design standard
Control Pollution Situation
Rated Impulse Voltage
Ball Pressure Test
3.0 Installation
3.1 DIL Switch Settings
Before mounting the unit, ensure the 4 DIL switches on the rear of
the unit have been moved to the required settings.
4
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]
TOP
LEFT
230 Vac ± 15%, 50/60 Hz
2 x SPDT voltage free, Type 1BS
10-230 Vac, 3(1)A
24 hours minimum
±1 min/month
±1 minute
45°C
148 x 96 x 42
EN 60730-2-7
Degree 2
2.5kV
75°C
RIGHT
FP975