airweigh LoadMaxx 5809 사용자 설명서 - 페이지 6

{카테고리_이름} airweigh LoadMaxx 5809에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. airweigh LoadMaxx 5809 16 페이지. For tractors with a hydraulic lift

Calibrating The Tractor Scale Overview

The order of calibration is not important; however, both EMPTY and

HEAVY weights must be properly entered before the weight display

is accurate. When calibrating, the EMPTY weights must be entered

while the vehicle is empty, and the HEAVY weights must be entered

while the vehicle is fully loaded. Failure to calibrate scales when

vehicle is actually empty and when it has a true heavy load will result

in inaccurate weights.

Leave the 5th wheel plate at the lowest position on stoppers.

1. Press ESC one or more times until the Main Menu appears,

with VIEW WEIGHTS blinking

2. Select PRINT,SETUP

3. Select SYSTEM SETUP

4. Select CALIBRATION

5. Select MANUAL CALIBRATION

6. Select EMPTY WEIGHT

7. The screen pauses for three seconds with

the display, "ENTER EMPTY – VEHICLE

MUST BE EMPTY" before proceeding automatically to the next

8. On the PICK AXL menu, select DRV (Drive) for the hydraulic lift

9. Using the up/down arrows ▲ or ▼ , enter 20lbs. for your

EMPTY weight and press ENTER. The screen will briefly show

Accepted to indicate its acceptance of the Empty Weight

If PIN is needed for access, enter it at this time