Danfoss SET3M 설치 및 사용자 지침 - 페이지 18
{카테고리_이름} Danfoss SET3M에 대한 설치 및 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss SET3M 20 페이지. Electro-mechanical
24 programmer for
heating & hot water
Danfoss SET3M에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)
페이지 인쇄
Using the Programmer
The 2 rocker switches are used to select how the SET3M
controls your hot water and heating. The heating and hot
water can be operated together or independently of each other
(i.e. during the summer when only hot water is required).
WATER switch
OFF - the Hot Water is manually switched OFF and
will stay off until you change the position of the switch
Timed - the Hot Water will come on and go off at the
times you have programmed
Constant - the Hot Water will come on manually
and stay on constantly until you change the position of
the switch
A red light adjacent to the WATER switch is lit whenever
the Water is switched on.
HEATING switch
OFF - the Heating is manually switched OFF and will
stay off until you change the position of the switch
Timed - the Heating will come on and go off at the
times you have programmed
Constant- the Heating will come on manually and stay
on constantly until you change the position of the
switch
A red light adjacent to the HEATING switch is lit whenever
the Heating is switched on.
18
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]