Danfoss SET3M 설치 및 사용자 지침 - 페이지 4
{카테고리_이름} Danfoss SET3M에 대한 설치 및 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss SET3M 20 페이지. Electro-mechanical
24 programmer for
heating & hot water
Danfoss SET3M에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)
페이지 인쇄
Installation
1.
Fix the wallplate to the wall or fl ush mounted box as
required. The connections are at the top and the
vertical centre line of the unit, at the position shown on
the diagram below C/L (in line with terminal
Outline of
programmer
Leave at
least 25mm
below
product
2.
Surface cables can only enter from below the unit. If
mounted on a fl ush mounted box, cables can enter
from the rear through the aperture in the wallplate.
3.
For mains voltage applications a link must be fi tted
between terminals L, 2 and 5.
4.
Whilst the unit does not require an Earth connection,
a terminal is provided on the wallplate for Earth
continuity purposes.
4
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]
C/L
Rear entry
cable access
)
Leave suffi cient space
for screwdriver access
Terminal
block
Wall or
plasterbox
fi xing
Cable aperture
knockouts