Danfoss TP7000-RF 설치 지침 사용자 지침 - 페이지 12
{카테고리_이름} Danfoss TP7000-RF에 대한 설치 지침 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss TP7000-RF 14 페이지. Electronic programmable room thermostat
Danfoss TP7000-RF에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (9 페이지)
페이지 인쇄
- 1. Installation Instructions
- 2. Specification
- 3. Installation
- 4. DIL Switch Settings
- 5. Your Programmable Room Thermostat
- 6. Preset Programmes
- 7. Before You Start
- 8. Display Preferences
- 9. Setting the Clock & Day
- 10. Setting the OSC Period
- 11. Accepting the Preset Programmes
- 12. Before You Change the Preset Programmes
- 13. Programming in 7-Day Mode
- 14. To Convert to Thermostat Mode
- 15. To Programme Holiday Mode
- 16. User Overrides
User Overrides
Sometimes you may need to change the way you use your
heating temporarily, i.e. due to unusually cold or warm
weather. The TP7000 has several user overrides, which can
be selected without affecting the set programmes.
J To temporarily increase or
decrease the programmed
temperature
– press L or M to select the
desired temperature.
J Extend Event 1 (i.e. 06.30
20°C) to last all day (so that
heating remains on at a constant
temperature all day)
– press button once as shown.
J To extend the current set
temperature by 1, 2 or 3 hours
– press button once for 1 extra
hour, twice for 2 extra hours, 3
times for 3 extra hours, and press
4 times to remove override.
J To alter main LCD display to
show either time or actual room
temperature
– press NEXT & COPY together.
Changing Batteries (not TP7000M)
Batteries will last in excess of two
years. Low battery indicator will fl ash
on the LCD display. The user has 15
days in which to replace the batteries
with high quality alkaline cells.
12
2