Danfoss TP7000-RF Instrukcja instalacji Instrukcja obsługi - Strona 12
Przeglądaj online lub pobierz pdf Instrukcja instalacji Instrukcja obsługi dla Termostat Danfoss TP7000-RF. Danfoss TP7000-RF 14 stron. Electronic programmable room thermostat
Również dla Danfoss TP7000-RF: Instrukcja instalacji (9 strony)
Drukuj stronę
- 1. Installation Instructions
- 2. Specification
- 3. Installation
- 4. DIL Switch Settings
- 5. Your Programmable Room Thermostat
- 6. Preset Programmes
- 7. Before You Start
- 8. Display Preferences
- 9. Setting the Clock & Day
- 10. Setting the OSC Period
- 11. Accepting the Preset Programmes
- 12. Before You Change the Preset Programmes
- 13. Programming in 7-Day Mode
- 14. To Convert to Thermostat Mode
- 15. To Programme Holiday Mode
- 16. User Overrides
User Overrides
Sometimes you may need to change the way you use your
heating temporarily, i.e. due to unusually cold or warm
weather. The TP7000 has several user overrides, which can
be selected without affecting the set programmes.
J To temporarily increase or
decrease the programmed
temperature
– press L or M to select the
desired temperature.
J Extend Event 1 (i.e. 06.30
20°C) to last all day (so that
heating remains on at a constant
temperature all day)
– press button once as shown.
J To extend the current set
temperature by 1, 2 or 3 hours
– press button once for 1 extra
hour, twice for 2 extra hours, 3
times for 3 extra hours, and press
4 times to remove override.
J To alter main LCD display to
show either time or actual room
temperature
– press NEXT & COPY together.
Changing Batteries (not TP7000M)
Batteries will last in excess of two
years. Low battery indicator will fl ash
on the LCD display. The user has 15
days in which to replace the batteries
with high quality alkaline cells.
12
2