Danfoss ECL Comfort 310 설치 매뉴얼 - 페이지 2

{카테고리_이름} Danfoss ECL Comfort 310에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss ECL Comfort 310 7 페이지. A302
Danfoss ECL Comfort 310에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 마운팅 매뉴얼 (4 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (12 페이지), 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (20 페이지), 서비스 매뉴얼 (16 페이지), 운영 매뉴얼 (8 페이지), 운영 매뉴얼 (16 페이지), 운영 매뉴얼 (10 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (12 페이지), 마운팅 매뉴얼 (20 페이지), 마운팅 매뉴얼 (20 페이지), 마운팅 매뉴얼 (12 페이지), 마운팅 매뉴얼 (16 페이지), 운영 매뉴얼 (8 페이지)

Installation Guide

1.1 Important safety and product information

1.1.1 Important safety and product information

This Installation Guide is an appendix to installation guides

associated with ECL application keys A230, A231, A260, A266, A361,

A368 and A376 and contains only a description of the extended

heat cut-out functionality.

The extended heat cut-out functionality can be realized with ECL

Comfort 210 and ECL Comfort 310.

For information on general functions please consult the installation

guide for the application key in question.

Additional documentation for ECL Comfort 210 and 310, modules

and accessories is available on http://den.danfoss.com/.

DEN-SMT/DK

ECL Comfort 210 and 310, extended heat cut-out

Safety Note

To avoid injury of persons and damages to the device, it is absolutely

necessary to read and observe these instructions carefully.

Necessary assembly, start-up, and maintenance work must be

performed by qualified and authorized personnel only.

Local legislations must be respected. This comprises also cable

dimensions and type of isolation (double isolated at 230 V).

A fuse for the ECL Comfort installation is max. 10 A typically.

The ambient temperature range for the ECL Comfort in operation is

0 - 55 °C. Exceeding this temperature range can result in malfunctions.

Installation must be avoided if there is a risk for condensation (dew).

The warning sign is used to emphasize special conditions that should

be taken into consideration.

This symbol indicates that this particular piece of information should

be read with special attention.

As this Installation Guide covers several system types, special system

settings will be marked with a system type. All system types are shown

in the chapter: 'Identifying your system type'.

°C (degrees Celsius) is a measured temperature value whereas K

(Kelvin) often is used for temperature differences.

VI.GU.U1.02

Danfoss District Energy