Danfoss ECL Comfort 310 Installation Manual - Page 2

Browse online or download pdf Installation Manual for Control Unit Danfoss ECL Comfort 310. Danfoss ECL Comfort 310 7 pages. A302
Also for Danfoss ECL Comfort 310: Installation Manual (8 pages), Mounting Manual (4 pages), User Manual (12 pages), User Manual (12 pages), Installation Manual (4 pages), Installation Manual (16 pages), Installation Manual (20 pages), Service Manual (16 pages), Operating Manual (8 pages), Operating Manual (16 pages), Operating Manual (10 pages), Installation Manual (20 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (20 pages), Installation Manual (16 pages), Installation Manual (16 pages), Installation Manual (20 pages), Installation Manual (12 pages), Mounting Manual (20 pages), Mounting Manual (20 pages), Mounting Manual (12 pages), Mounting Manual (16 pages), Operating Manual (8 pages)

Print Page
Danfoss ECL Comfort 310 Installation Manual
Installation Guide

1.1 Important safety and product information

1.1.1 Important safety and product information
This Installation Guide is an appendix to installation guides
associated with ECL application keys A230, A231, A260, A266, A361,
A368 and A376 and contains only a description of the extended
heat cut-out functionality.
The extended heat cut-out functionality can be realized with ECL
Comfort 210 and ECL Comfort 310.
For information on general functions please consult the installation
guide for the application key in question.
Additional documentation for ECL Comfort 210 and 310, modules
and accessories is available on http://den.danfoss.com/.
2
DEN-SMT/DK
ECL Comfort 210 and 310, extended heat cut-out
Safety Note
To avoid injury of persons and damages to the device, it is absolutely
necessary to read and observe these instructions carefully.
Necessary assembly, start-up, and maintenance work must be
performed by qualified and authorized personnel only.
Local legislations must be respected. This comprises also cable
dimensions and type of isolation (double isolated at 230 V).
A fuse for the ECL Comfort installation is max. 10 A typically.
The ambient temperature range for the ECL Comfort in operation is
0 - 55 °C. Exceeding this temperature range can result in malfunctions.
Installation must be avoided if there is a risk for condensation (dew).
The warning sign is used to emphasize special conditions that should
be taken into consideration.
This symbol indicates that this particular piece of information should
be read with special attention.
As this Installation Guide covers several system types, special system
settings will be marked with a system type. All system types are shown
in the chapter: 'Identifying your system type'.
°C (degrees Celsius) is a measured temperature value whereas K
(Kelvin) often is used for temperature differences.
VI.GU.U1.02
Danfoss District Energy