Danfoss APP 0.6 서비스 매뉴얼 - 페이지 4

{카테고리_이름} Danfoss APP 0.6에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss APP 0.6 12 페이지. Disassembling and assembling
Danfoss APP 0.6에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)

페이지 인쇄

Disassembling and Assembling, APP 0.6-1.0

Service guide |

4 | 180R9092 | DKCFN.PI.013.EC5.02 | 521B0739

7. Remove the cylinder barrel.

9. Gently lever the valve plate assembly free

with the aid of a screwdriver.

11. Gently press, by hand, the valve onto the

cylinder barrel.

8. Remove the port plate and guide pin.

Mount backup

ring first

Then mount

O-ring

10. Replace the O-rings and the back-up rings

on the valve plate. Mount the new back-

up rings on the new valve plate first and

then mount the new O-rings.

Wet the O-rings and back-up rings with

clean (filtered) soap water.

12. Position the port plate over the guide pin.

IMPORTANT: Make sure that the guide

pin is located in the locating hole in the

port plate

Locating hole

Guide pin