Dunlop Authentic Hendrix 68 Shrine Series 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} Dunlop Authentic Hendrix 68 Shrine Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dunlop Authentic Hendrix 68 Shrine Series 4 페이지.
Dunlop Authentic Hendrix 68 Shrine Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지)
페이지 인쇄Basic Operation
Power
The Authentic Hendrix
™
Chorus/Vibrato is powered by the Dunlop ECB003
9-volt adapter or an MXR
(each sold separately). This pedal cannot be powered
by a battery.
'68 Shrine Series Uni-Vibe
Brick
Series power supply
®
™
Directions
1
Run a cable from your guitar to the JHMS3's INPUT jack
®
and run another cable from the JHMS3's OUTPUT jack
to your amplifier.
2
Start with SPEED, LEVEL, and DEPTH controls at 12
o'clock.
3
Turn the effect on by depressing the footswitch.
4
Rotate SPEED knob clockwise to increase sweep rate of
effect or counterclockwise to decrease it.
5
Rotate LEVEL knob clockwise to increase overall volume
or counterclockwise to decrease it.
6
Rotate the DEPTH knob clockwise to increase intensity
of effect or counterclockwise to decrease it.
7
With the VIBE switch in its OUT position, the pedal is set
to chorus mode. Push the VIBE switch IN to engage vibrato
mode, indicated by associated LED.
JHMS3 | AUTHENTIC HENDRIX
'68 SHRINE SERIES UNI-VIBE
™
CHORUS/VIBRATO 3
®