Dunlop Authentic Hendrix 68 Shrine Series Quick Start Manual - Page 3

Browse online or download pdf Quick Start Manual for Music Pedal Dunlop Authentic Hendrix 68 Shrine Series. Dunlop Authentic Hendrix 68 Shrine Series 4 pages.
Also for Dunlop Authentic Hendrix 68 Shrine Series: Quick Start Manual (4 pages)

Print Page
Basic Operation
Power
The Authentic Hendrix
™
Chorus/Vibrato is powered by the Dunlop ECB003
9-volt adapter or an MXR
(each sold separately). This pedal cannot be powered
by a battery.
'68 Shrine Series Uni-Vibe
Brick
Series power supply
®
™
Directions
1
Run a cable from your guitar to the JHMS3's INPUT jack
®
and run another cable from the JHMS3's OUTPUT jack
to your amplifier.
2
Start with SPEED, LEVEL, and DEPTH controls at 12
o'clock.
3
Turn the effect on by depressing the footswitch.
4
Rotate SPEED knob clockwise to increase sweep rate of
effect or counterclockwise to decrease it.
5
Rotate LEVEL knob clockwise to increase overall volume
or counterclockwise to decrease it.
6
Rotate the DEPTH knob clockwise to increase intensity
of effect or counterclockwise to decrease it.
7
With the VIBE switch in its OUT position, the pedal is set
to chorus mode. Push the VIBE switch IN to engage vibrato
mode, indicated by associated LED.
JHMS3 | AUTHENTIC HENDRIX
'68 SHRINE SERIES UNI-VIBE
™
CHORUS/VIBRATO 3
®