Danfoss VLT 5000 매뉴얼

{카테고리_이름} Danfoss VLT 5000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Danfoss VLT 5000 7 페이지. Frequency converter
Danfoss VLT 5000에 대해서도 마찬가지입니다: 애플리케이션 노트 (16 페이지)

페이지 인쇄
Danfoss VLT 5000 매뉴얼
Abstract
This application note describes how to set up
Interbus communication between a Danfoss VLT
5000 frequency converter and Interbus CMD G4.
CMD stand for Configuration Monotoring and
Diagnostics.
VLT 5000 Interbus card
The photo shows the Interbus card which can be
installed in VLT 5001 - 5500.
LED identification
Name
Name
Name
Indicates
Indicates
Indicates
Name
Name
Indicates
Indicates
CC/CR: Cable Check.
BA
Bus Active.
RD:
Status of outgoing bus. Red
TR:
Transmit/Receive.
UL:
Power OK.
MN.50.U1.02 - VLT is a registered Danfoss trademark
VLT
Interbus connection for Bookstyle
IBS IN
RD
UL
CC/CR
TR
Color
Color
Color
On
On
On
Color
Color
On
On
Green
Incoming bus active
Green
Bus active
Outgoing bus stopped
Green
PCP Communication running
Green
Voltage within permissible range
®
5000 and Interbus CMD
This note will describe:
Configuring of the VLT 5000 and CMD
Drivecom profile
PCP communication
All examples in this instruction are shown with a
PLC card as an Interbus master, but they are also
relevant to a PC system with an Interbus Master.
IBS OUT
BA
OFF
OFF
OFF
OFF
OFF
Incoming bus swicthed off
Bus stopped
Outgoing bus active
NO PCP Communication running
No Voltage
UL
RD
BA
CC/CR
TR
1