Casio E-Con EA-200 기술 참조 - 페이지 13
{카테고리_이름} Casio E-Con EA-200에 대한 기술 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Casio E-Con EA-200 20 페이지. Casio ea-200 calculator-tools: user guide
Casio E-Con EA-200에 대해서도 마찬가지입니다: 제품 카탈로그 (16 페이지)
페이지 인쇄
Non-triggering Example (Trigger Edge = Rising)
Trigger
threshold
At start of trigger detection, sampled
value is greater than hysteresis lower limit.
To trigger at a target threshold, increase or decrease the hysteresis part with
the edge settings to specify the threshold.
However, make sure sampled value is outside of hysteresis range.
Countdown
(Trigger Source = 10)
1–10 Countdown (sec)
* Do not press SETUP, START/STOP, or ON/OFF key during countdown.
SONIC Trigger
(Trigger Source = 11)
Distance (meters)
6. Trigger Edge
Hard trigger
(Trigger Source = 2, 3, 4, 12)
0 Falling
Sampling started when [Sample Value] < [Trigger Threshold]
1 Rising
Sampling started when [Sample Value] > [Trigger Threshold]
2 Both (Rising and Falling)
Hysteresis
Does not exceed hysteresis upper limit.
SONIC Trigger
(Trigger Source = 11)
0 Falling
Sampling started when [Sample Value] < [Trigger Threshold]
1 Rising
Sampling started when [Sample Value] > [Trigger Threshold]
2 Difference Falling
Sampling started when [Sample Value] > [Trigger Threshold]
3 Difference Rising
Sampling started when [Current Value] – [Previous Value] > [Trigger
Threshold]
7. Clock Source
0
Timer
Conforms to sampling interval.
10 Same as Trigger Source
Sampled at same timing as Trigger Source.
Timer when Trigger Source is 0, 10, 11.
– 13 –