AudioCodes Mediant 3100 빠른 설정 매뉴얼 - 페이지 3

{카테고리_이름} AudioCodes Mediant 3100에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes Mediant 3100 10 페이지. Sbc and gateway

LED indicating High-Availability (HA) status:

Note: HA will only be supported from a specific 7.4 software version.

Green On

Green Flashing The device is running in HA mode and is the Redundant unit.

Orange On

Red On

Red Flashing

Off

RST

Reset pinhole button for resetting the device and restoring it to factory defaults:

To reset the device: Using a paper clip or any other similar pointed object, press and



hold down the button for at least 2 seconds (but no more than 10 seconds).

To restore the device to factory defaults: Using a paper clip or any other similar



pointed object, press down the button for at least 15 seconds (but not longer than 25

seconds).

CONSOLE

RS-232 serial port (RJ-45) for connecting to the device's Command-Line Interface (CLI).

USB 2.0 Type-A port, which can be used for storage capabilities using an external USB hard

drive or flash disk (disk on key).

Fan Tray module cover.

The device is running in HA mode and is the Active unit.

The device is running in Standalone mode (i.e., HA not configured).

The device is the Active unit, but an HA synchronization failure exists

(e.g., HA Maintenance link failure).

The device is the Redundant unit, but a failure exists in HA.

The device is booting up, before HA synchronization.

3 |

P a g e