AudioCodes Mediant 3100 Manual de configuração rápida - Página 3

Procurar online ou descarregar pdf Manual de configuração rápida para Controlador AudioCodes Mediant 3100. AudioCodes Mediant 3100 10 páginas. Sbc and gateway

AudioCodes Mediant 3100 Manual de configuração rápida
HA
LED indicating High-Availability (HA) status:
Note: HA will only be supported from a specific 7.4 software version.
Green On
Green Flashing The device is running in HA mode and is the Redundant unit.
Orange On
Red On
Red Flashing
Off
2
RST
Reset pinhole button for resetting the device and restoring it to factory defaults:
To reset the device: Using a paper clip or any other similar pointed object, press and
hold down the button for at least 2 seconds (but no more than 10 seconds).
To restore the device to factory defaults: Using a paper clip or any other similar
pointed object, press down the button for at least 15 seconds (but not longer than 25
seconds).
3
CONSOLE
RS-232 serial port (RJ-45) for connecting to the device's Command-Line Interface (CLI).
4
USB 2.0 Type-A port, which can be used for storage capabilities using an external USB hard
drive or flash disk (disk on key).
5
-
Fan Tray module cover.
The device is running in HA mode and is the Active unit.
The device is running in Standalone mode (i.e., HA not configured).
The device is the Active unit, but an HA synchronization failure exists
(e.g., HA Maintenance link failure).
The device is the Redundant unit, but a failure exists in HA.
The device is booting up, before HA synchronization.
3 |
P a g e