Freecom HARD DRIVE QUATTRO - 사용자 설명서 - 페이지 7

{카테고리_이름} Freecom HARD DRIVE QUATTRO -에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Freecom HARD DRIVE QUATTRO - 20 페이지. External hard drive / 3.5" / usb 2.0 / firewire 800 & 400 / esata
Freecom HARD DRIVE QUATTRO -에 대해서도 마찬가지입니다: 데이터시트 (2 페이지), 사용자 설명서 (19 페이지), 개요 (2 페이지)

페이지 인쇄

Chapter 1: Hardware Installation

WARNING! Only connect the Hard Drive Quattro via the USB, Firewire or

eSATA port. Never use ports at the same time!

Remove the plastic protective cover sheets from the front and rear of the drive.

Before connecting the cables make sure the Freecom Hard Drive Quattro is switched off.

Since USB .0 is backwards compatible with USB 1.1, the Freecom Hard

Drive Quattro can be connected to all USB ports. When connected to a USB

1.1 port, however, the performance (data transfer rate) of the Freecom

Hard Drive Quattro will be much lower than when the drive is connected

to a USB .0 port.

For optimum performance the Freecom Hard Drive Quattro should always

be connected to a USB .0 interface.

1. Connect the interface cable (USB, Firewire or eSATA) to the

Freecom Hard Drive Quattro.

2. Connect the cable of the power supply to the Freecom Hard

Drive Quattro and the power supply itself to the socket.

3. Connect the interface cable (USB, Firewire or eSATA) to the

interface port (USB, Firewire or eSATA) of your computer.

4. Switch on the Freecom Hard Drive Quattro.