Freecom HARD DRIVE QUATTRO - User Manual - Page 7

Browse online or download pdf User Manual for Storage Freecom HARD DRIVE QUATTRO -. Freecom HARD DRIVE QUATTRO - 20 pages. External hard drive / 3.5" / usb 2.0 / firewire 800 & 400 / esata
Also for Freecom HARD DRIVE QUATTRO -: Datasheet (2 pages), User Manual (19 pages), Overview (2 pages)

Print Page

Freecom HARD DRIVE QUATTRO - User Manual

Chapter 1: Hardware Installation

WARNING! Only connect the Hard Drive Quattro via the USB, Firewire or

eSATA port. Never use ports at the same time!

Remove the plastic protective cover sheets from the front and rear of the drive.

Before connecting the cables make sure the Freecom Hard Drive Quattro is switched off.

Since USB .0 is backwards compatible with USB 1.1, the Freecom Hard

Drive Quattro can be connected to all USB ports. When connected to a USB

1.1 port, however, the performance (data transfer rate) of the Freecom

Hard Drive Quattro will be much lower than when the drive is connected

to a USB .0 port.

For optimum performance the Freecom Hard Drive Quattro should always

be connected to a USB .0 interface.

1. Connect the interface cable (USB, Firewire or eSATA) to the

Freecom Hard Drive Quattro.

2. Connect the cable of the power supply to the Freecom Hard

Drive Quattro and the power supply itself to the socket.

3. Connect the interface cable (USB, Firewire or eSATA) to the

interface port (USB, Firewire or eSATA) of your computer.

4. Switch on the Freecom Hard Drive Quattro.