Freecom NETWORK HARD DRIVE PRO 사용자 설명서 - 페이지 6
{카테고리_이름} Freecom NETWORK HARD DRIVE PRO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Freecom NETWORK HARD DRIVE PRO 14 페이지. Docking station / 2.5” & 3.5” sata & pata (ide) / usb 2.0
Freecom NETWORK HARD DRIVE PRO에 대해서도 마찬가지입니다: 사양 (2 페이지), 사양 (2 페이지), 사양 (2 페이지), 데이터시트 (2 페이지), 사양 (2 페이지), 개요 (3 페이지)
페이지 인쇄
Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro
Chapter 1: Start Up
EN
1.1 Hardware installation
1
Since USB .0 is backwards compatible with USB 1.1, the Freecom Blu-ray
Rewriter Pro / Blu-ray Combo Pro can be connected to all USB ports. When
connected to a USB 1.1 port, however, the performance (data transfer rate) of
the Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro will be much lower
than when the drive is connected to a USB .0 port.
6
1. Connect the interface cable (USB or Firewire) to the
Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro.
2. Connect the cable of the power supply to the Freecom
Blu-ray Rewriter Pro / Blu-ray Combo Pro and the power
supply itself to the socket.
3. Connect the interface cable (USB or Firewire) to the
interface port (USB or Firewire) of your computer.
4. Switch on the Freecom Blu-ray Rewriter Pro / Blu-ray
Combo Pro.