Freecom NETWORK HARD DRIVE PRO 사용자 설명서 - 페이지 7

{카테고리_이름} Freecom NETWORK HARD DRIVE PRO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Freecom NETWORK HARD DRIVE PRO 14 페이지. Docking station / 2.5” & 3.5” sata & pata (ide) / usb 2.0
Freecom NETWORK HARD DRIVE PRO에 대해서도 마찬가지입니다: 사양 (2 페이지), 사양 (2 페이지), 사양 (2 페이지), 데이터시트 (2 페이지), 사양 (2 페이지), 개요 (3 페이지)

페이지 인쇄

1. Table of Contents

Note: You can plug the USB cable into your computer and unplug it while

the computer is running ("hot plug & play"). Remove the cable from the

computer when doing so, never remove the cable from the drive when

the computer is on.

For optimal performance, the Freecom Blu-ray Rewriter Pro / Blu-ray

Combo Pro should always be connected to a USB .0/Firewire port.

1. Power Switch

The Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro is always powered, even if the

USB/Firewire cable is disconnected from your computer. Therefore, please turn off the

Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro if it is not used. The power switch is

on the back side of the Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro.

Attention! Before switching off the Freecom Blu-ray Rewriter Pro / Blu-ray

Combo Pro manually, make sure to safely remove the Freecom Blu-ray

Rewriter Pro / Blu-ray Combo Pro via your operating system (the „unplug

or eject hardware" option in the Windows taskbar). Failing to do so may

result in loss of data.

Start Up