AudioCodes RXV81 빠른 매뉴얼 - 페이지 4

{카테고리_이름} AudioCodes RXV81에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioCodes RXV81 8 페이지. Collaboration bar
AudioCodes RXV81에 대해서도 마찬가지입니다: 배포 매뉴얼 (10 페이지)

페이지 인쇄

5. Cabling

The RXV81 connector ports are located on its rear panel, as shown below:

L-R

Description

Use the supplied HDMI Out cable to connect this port to a display (standalone mode).

Applies to RXV81 as a standalone device (default). Video and sharing are presented on the

display. Meetings are controlled via the RC-RXV and/or RX-PAD.

Power on / Reset button.

To restart RXV81, press and hold

Not applicable

USB type-A port to connect to touch-capable room display.

Ethernet LAN GbE port to connect RJ-45 terminals.

USB type-C to connect to a Bring-Your-Own-Device (BYOD) computer running a Unified

Communication (UC) client for ad hoc or full peripheral mode.

DC power input port for the 12V power supply adapter.

12V-3A

6. Connecting RXV81 as a USB Peripheral

You can connect RXV81 to a peripheral to Bring-Your-Own-Device (BYOD) computer running a UC client for

ad hoc or full peripheral mode. In peripheral mode, the BYOD displays the meeting video and content.

Meetings are controlled via the BYOD (join, accept, manage participants). Audio/video (camera ePTZ, mic

mute) can be controlled from the UC client, RC-RXV, and/or RX-PAD (camera on / off, mute, volume).

For RX-PAD Meeting Room Controller:

Make sure that the RX-PAD and RXV81 are connected to the same network.

For Wi-Fi connectivity, make sure that RX-PAD is powered by the supplied AC/DC power adaptor.

for at least 2 seconds.

P a g e

| 4