Dupla MultiControl 사용 설명서 - 페이지 8

{카테고리_이름} Dupla MultiControl에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dupla MultiControl 16 페이지.
Dupla MultiControl에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

4. Quick Start Guide to Programming

Switch display lighting 'on' or 'off':

Toggle mode:

Single mode:

Changing from toggle to single mode: Press and hold the ▲ key.

Audible acknowledgment:

Switching to programming mode:

Moving within the menu structure:

Modifying programming:

Quitting the programming mode:

Press and hold the ▼ key = on/off.

Temperature and time of day are displayed alternately

in a 2 second rhythm (factory preset.

Optionally either pH value, temperature or time of day are displayed

continuously (by pressing the ▲ and ▼ key).

Hint: Shall the pH value be displayed in the toggle and single mode,

please select "On" when programming the pH set-point in

the menu item.

Press key for a moment , i.e. a 'tap' = short sound.

Hold key down, i.e. for 2 seconds = long sound.

A) Pressing the "Menu" key enters the main programming

menu. During programming the symbol

B) It is possible to scroll through the menu items with the ▲ and

▼ keys (Sequence: Water temperature – HEAT/COOL mode - Difference HEAT/

COOL mode - Temperature alarm - Switching times - pH set-point

- pH alarm - Calibrate pH electrode - Calibration reminder - Time).

C) Quickly pressing "Menu" enables the modiﬁ cation of programmed

values, the changeable value ﬂ ashes.

D) Increase or decrease required values with the ▲ and ▼ keys.

E) Acknowledge by activating the "Menu" key.

For modiﬁ cation of other programmed values continue from step B).

F) Quitting the programming mode and accessing the operational

mode is done automatically after 3 minutes of inactivity or "Menu"

by holding down the key.

Enter programming menu

Scroll up or down in menu

Enable change in value

Increase or lower value

Acknowledge value change

Press & hold key, to quit programming

and access operating mode

is displayed.