Dupla MultiControl 사용 설명서 - 페이지 9

{카테고리_이름} Dupla MultiControl에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dupla MultiControl 16 페이지.
Dupla MultiControl에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

5. Programming Instructions

First tap "Menu" key to start the programming mode.
Hint: The symbol Menu indicates you are in the programming mode. By holding down "Menu" it is
possible to quit the programming mode at any time.
5.1
Control of Water Temperature
When pressing the "Menu" key, "25" fl ashes on the display.
Set the required value with the ▲ or ▼ key.
Acknowledge with "Menu" key, "0" will fl ash.
Set the required value with the ▲ or ▼ key.
Acknowledge with the "Menu" key to return to the main menu.
Scroll through to the next menu item with the ▲ key.
5.2
Switch to Cooling Operation
If the alternate cooling operation is not desired, scroll directly to the next menu item by pressing the ▲ key.
Otherwise press the "Menu" key -"HEAT" fl ashes.
Change to "COOL" with the ▲ key
Acknowledge with "Menu" to return to the main menu.
Scroll through to the next menu item with the ▲ key.
5.3
Control of a Cooling Device
Press the "Menu" key, "3.0" fl ashes.
Set the required value with the ▲ or ▼ key.
Acknowledge with the "Menu" key to return to the main menu.
Scroll through to the next menu item with the ▲ key.
9