AudioControl Ten Series III 사용자 설명서 - 페이지 9

{카테고리_이름} AudioControl Ten Series III에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioControl Ten Series III 12 페이지. Octave equalizer

HOOKING UP THE TEN WITH A TAPE DECK AND

RECEIVER

1. Locate the four sockets marked Tape on the back of your receiver, pre-

amp or integrated amplifier. Two will be marked IN or PLAY and two will say

OUT or RECORD.

2. Run a set of connection cords from the receiver's TAPE OUT to the

TEN's MAIN IN.

3. Run a set of connection cords from the receiver's TAPE IN to the TEN's

MAIN OUT sockets. Got that? IN to OUT and OUT to IN.

4. Optionally, if you have a VCR, disc player or TV with audio out, connect

the video device to the TEN's VIDEO AUX sockets.

5. Run a set of patchcords from the TEN's TAPE OUT to the tape deck's IN

sockets.

6. Now run a set of cords from the TEN's TAPE IN to the tape deck's TAPE

OUT. Again, it's IN to OUT and OUT to IN. And Left to Left, Right to Right.