AudioControl Ten Series III Kullanıcı Kılavuzu - Sayfa 9
Stereo Ekolayzer AudioControl Ten Series III için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AudioControl Ten Series III 12 sayfaları. Octave equalizer
Sayfayı YazdırHOOKING UP THE TEN WITH A TAPE DECK AND
RECEIVER
1. Locate the four sockets marked Tape on the back of your receiver, pre-
amp or integrated amplifier. Two will be marked IN or PLAY and two will say
OUT or RECORD.
2. Run a set of connection cords from the receiver's TAPE OUT to the
TEN's MAIN IN.
3. Run a set of connection cords from the receiver's TAPE IN to the TEN's
MAIN OUT sockets. Got that? IN to OUT and OUT to IN.
4. Optionally, if you have a VCR, disc player or TV with audio out, connect
the video device to the TEN's VIDEO AUX sockets.
5. Run a set of patchcords from the TEN's TAPE OUT to the tape deck's IN
sockets.
6. Now run a set of cords from the TEN's TAPE IN to the tape deck's TAPE
OUT. Again, it's IN to OUT and OUT to IN. And Left to Left, Right to Right.
8