Duplo DBM-120 설치 매뉴얼 - 페이지 9

{카테고리_이름} Duplo DBM-120에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Duplo DBM-120 12 페이지. Connecting kit model: dc-6000s;dc-8000s 2; dc-10000s
Duplo DBM-120에 대해서도 마찬가지입니다: 설치 매뉴얼 (13 페이지)

Duplo DBM-120 설치 매뉴얼
2. INSTALLATION PROCEDURE
NOTE
: When connecting the DBM-120T, refer to its installation manual.
Attach the following q to u parts to this unit.
q Side-stapled paper stacker ................................... 1
w Guide unit ............................................................ 2
e Paper holding guide unit ...................................... 1
r Paper holder ......................................................... 1
t Belt stacker .......................................................... 1
y Paper guide roller unit ......................................... 1
u Saddle-stapled paper stacker ............................... 1
1
For q, insert the screws attached to this
unit into the holes and tighten.
Place w and e on the side-stapled paper
stacker as shown in the figure.
For r, adjust the Z collars attached to this
unit to the holes and insert.
2
For t, adjust the Z collars to the holes on
this unit and insert, and then insert the
plug of the cable into the connector of this
unit.
For y, adjust the shaft to the hole on this
unit, insert, and rotate it by 90°.
For u, adjust the Z collars attached to the
belt stacker to the holes and insert.
6

2-3. Attaching the Accessories

w Guide units
e Paper holding guide unit
q Side-stapled
paper stacker
y Paper guide roller unit
u Saddle-stapled
paper stacker
r Paper holder
t Belt stacker