Duplo DBM-120 Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Maszyny składające Duplo DBM-120. Duplo DBM-120 12 stron. Connecting kit model: dc-6000s;dc-8000s 2; dc-10000s
Również dla Duplo DBM-120: Instrukcja instalacji (13 strony)

Drukuj stronę

2. INSTALLATION PROCEDURE

NOTE

: When connecting the DBM-120T, refer to its installation manual.

Attach the following q to u parts to this unit.

q Side-stapled paper stacker ................................... 1

w Guide unit ............................................................ 2

e Paper holding guide unit ...................................... 1

r Paper holder ......................................................... 1

t Belt stacker .......................................................... 1

y Paper guide roller unit ......................................... 1

u Saddle-stapled paper stacker ............................... 1

For q, insert the screws attached to this

unit into the holes and tighten.

Place w and e on the side-stapled paper

stacker as shown in the figure.

For r, adjust the Z collars attached to this

unit to the holes and insert.

For t, adjust the Z collars to the holes on

this unit and insert, and then insert the

plug of the cable into the connector of this

unit.

For y, adjust the shaft to the hole on this

unit, insert, and rotate it by 90°.

For u, adjust the Z collars attached to the

belt stacker to the holes and insert.

2-3. Attaching the Accessories

w Guide units

e Paper holding guide unit

q Side-stapled

paper stacker

y Paper guide roller unit

u Saddle-stapled

paper stacker

r Paper holder

t Belt stacker