AudioEngine S6 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} AudioEngine S6에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AudioEngine S6 17 페이지. Wireless subwoofer
AudioEngine S6에 대해서도 마찬가지입니다: 설정 (2 페이지)

Inputs

The two audio inputs (3.5mm mini-jack and RCA Left/Right) are

line-level inputs for connecting an output or sub out of your music

source (AV receiver, preamp, powered speakers, etc.) into the S6.

Both inputs are open or active, so you can connect two different

sources at the same time if desired.

LFE input

If your preamp or AV receiver has an

LFE (Low Frequency Effects)

output, use the single Left/LFE input on the S6 rear panel.

Standby auto on/off switch

If "Auto on" is selected, S6 will automatically enter Standby mode

after 15 minutes if no signal is detected during this time. Changing

the switch to "Off"disables this feature.

Power on/Standby indicator

This indicator will be GREEN when an input signal is present (when

music is playing) and AMBER when no signal is present. The S6 will

automatically enter Standby mode after 15 minutes if no signal is

detected during this

time.