AudioEngine S6 Skrócona instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Subwoofer AudioEngine S6. AudioEngine S6 17 stron. Wireless subwoofer
Również dla AudioEngine S6: Konfiguracja (2 strony)
Drukuj stronęInputs
The two audio inputs (3.5mm mini-jack and RCA Left/Right) are
line-level inputs for connecting an output or sub out of your music
source (AV receiver, preamp, powered speakers, etc.) into the S6.
Both inputs are open or active, so you can connect two different
sources at the same time if desired.
LFE input
If your preamp or AV receiver has an
LFE (Low Frequency Effects)
output, use the single Left/LFE input on the S6 rear panel.
Standby auto on/off switch
If "Auto on" is selected, S6 will automatically enter Standby mode
after 15 minutes if no signal is detected during this time. Changing
the switch to "Off"disables this feature.
Power on/Standby indicator
This indicator will be GREEN when an input signal is present (when
music is playing) and AMBER when no signal is present. The S6 will
automatically enter Standby mode after 15 minutes if no signal is
detected during this
time.