Daniamant Dan WR3 설치 및 유지 관리 지침 - 페이지 2
{카테고리_이름} Daniamant Dan WR3에 대한 설치 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Daniamant Dan WR3 4 페이지. Lifejacket light
페이지 인쇄Installation
The Dan WR3 is for use on solid foam, easy to don lifejackets only. The
recessed Clip may be fitted only by the lifejacket manufacturer, as specialised
cutting tools are required; the light may be changed by anybody.
New Clip (new jackets), part no.1953 for standard blue clip for other colours contact
It is the responsibility of the lifejacket manufacturer to ensure that the light is
attached securely and is in the correct position on the lifejacket to provide
maximum visibility when the wearer is in the water.
Retrofit
The Dan WR3 can also be fitted to lifejackets previously fitted with model Dan
WR2. The original clip for the Dan WR2 must be removed and the replacement
clip fitted.
Clip for replacements (old jackets originally fitted with DAN WR2), part no. 1954 for the standard blue
clip, for other colours contact [email protected]
2