Audiolab 8300A 사용자 지침 - 페이지 5

{카테고리_이름} Audiolab 8300A에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiolab 8300A 13 페이지.
Audiolab 8300A에 대해서도 마찬가지입니다: 사용자 지침 (13 페이지)

페이지 인쇄

4: Remote Handset

NOTE : the handset buttons shown crossed out are for use with other Audiolab units like

Audiolab 8300CD and are not operational when used with the 8300A

1 STANDBY

Press to bring the unit in/out of standby

Move to next menu page or setting

3 VOL–

Press to decrease volume

4 XLR

Press to select XLR input

5 PHONO

Press to select PHONO input

6 VIDEO

Press to select VIDEO input

7 TUNER

Press to select TUNER input

8 DISPLAY

Press to cycle through display brightness levels

9 MM/MC

Press to toggle phono MM/MC mode

10 AUX2

Press to select AUX2 input

11 AUX1

Press to select AUX1 input

12 CD

Press to select CD input

Press to select menu page or setting

Move to last menu page or setting

15 VOL

Press to increase volume

16 MUTE

Press to mute or unmute the sound

Page 4

Fitting Batteries

Open the cover, unwrap the supplied AAA batteries and

place them in the battery compartment the correct polarity

replace the cover.

Always use AAA batteries and always replace them in sets.

Never mix old and new batteries. Very weak batteries can

leak and damage the handset. Replace them in good time!

There is a risk of fire and burns if a battery is handled

improperly. Do not disassemble, crush, puncture, short

external contacts, or dispose of in fire or water.

Do not attempt to open or service a battery. Discard used

batteries in full accordance with recycling regulations in

force in your area.

Handset Operation

The handset operates several Audiolab components. The

handset buttons shown crossed out are for use with other

Audiolab units and are not operational when used with the

8300A.

Point the handset at the remote receiver and press the

relevant key. The handset should be within 15 meters of the

player and there must be a clear line of sight between the

two units.