Audiolab 8300A Instrukcje użytkownika - Strona 5
Przeglądaj online lub pobierz pdf Instrukcje użytkownika dla Wzmacniacz Audiolab 8300A. Audiolab 8300A 13 stron.
Również dla Audiolab 8300A: Instrukcje użytkownika (13 strony)
Drukuj stronę
4: Remote Handset
NOTE : the handset buttons shown crossed out are for use with other Audiolab units like
Audiolab 8300CD and are not operational when used with the 8300A
1 STANDBY
Press to bring the unit in/out of standby
2
Move to next menu page or setting
3 VOL–
Press to decrease volume
4 XLR
Press to select XLR input
5 PHONO
Press to select PHONO input
6 VIDEO
Press to select VIDEO input
7 TUNER
Press to select TUNER input
8 DISPLAY
Press to cycle through display brightness levels
9 MM/MC
Press to toggle phono MM/MC mode
10 AUX2
Press to select AUX2 input
11 AUX1
Press to select AUX1 input
12 CD
Press to select CD input
13
Press to select menu page or setting
14
Move to last menu page or setting
15 VOL
Press to increase volume
16 MUTE
Press to mute or unmute the sound
Page 4
Fitting Batteries
Open the cover, unwrap the supplied AAA batteries and
place them in the battery compartment the correct polarity
replace the cover.
Always use AAA batteries and always replace them in sets.
Never mix old and new batteries. Very weak batteries can
leak and damage the handset. Replace them in good time!
There is a risk of fire and burns if a battery is handled
improperly. Do not disassemble, crush, puncture, short
external contacts, or dispose of in fire or water.
Do not attempt to open or service a battery. Discard used
batteries in full accordance with recycling regulations in
force in your area.
Handset Operation
The handset operates several Audiolab components. The
handset buttons shown crossed out are for use with other
Audiolab units and are not operational when used with the
8300A.
Point the handset at the remote receiver and press the
relevant key. The handset should be within 15 meters of the
player and there must be a clear line of sight between the
two units.