AEV Bison 설치 매뉴얼 - 페이지 7
{카테고리_이름} AEV Bison에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEV Bison 12 페이지.
페이지 인쇄III. WINCH INSTALLATION
1.
Set bracket into place in front of the airbox.
2.
Position the controller bracket in place and loosely install the radiator support bolts removed earlier (fig. 12).
FRONT OF VEHCILE
3.
Install supplied bolt through the tab at the bottom of the bracket into the existing hole shown and
secure with supplied flange nut (fig. 13). NOTE: Some vehicles may have plastic clip that will need to be
removed.
4.
Route motor leads between the radiator shroud and inner frame rail, then through the gap between the
radiator and the lower radiator support.
A M E R I C A N
E X P E D I T I O N
Figure 12
FRONT OF VEHCILE
Figure 13
V E H I C L E S
5