AUDIOLINE SENSOR 500 사용자 설명서 - 페이지 12

{카테고리_이름} AUDIOLINE SENSOR 500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AUDIOLINE SENSOR 500 19 페이지. Audioline sensor 500 initial setup
AUDIOLINE SENSOR 500에 대해서도 마찬가지입니다: 매뉴얼 (1 페이지), 초기 설정 매뉴얼 (1 페이지)

페이지 인쇄

ERASE PHONE NUMBER(S)

You may erase a single number or all numbers on the call list.

ERASE A NUMBER

· Scroll the call list until the number to be erased is shown on the display.

· Press

twice quickly, then release

ERASE ALL NUMBERS

· Scroll the call list until a number is shown on the display.

· Press and hold

· Press and release

IF THE CALL LIST IS FULL

The call list memory capacity is 60 telephone numbers. When the memory is

full, each new coming call will replace the oldest stored number, the principle

"first in' first out" applies. The new number receives the highest number, 60, and

all other numbers are moved one step up in the memory order.

DIALLING A NUMBER FROM THE CALL LIST

· Scroll the call list with

displayed.

· Lift the handset and press and release

It is also possible to first press and release

the called party answers.

NOTE!

If a charge for local calls is unacceptable, the "Dial Button" should not be used for

local calls when using some Service providers. Only the 7-digits of the local number

should be dialled from your telephone. Do not dial the area code or the "0" prefix

until the display shows "ERASE ALL?"., then release.

again. All phone numbers are now erased.

until the desired phone number is

and then lift the handset when