AUDIOLINE SENSOR 500 사용자 설명서 - 페이지 13

{카테고리_이름} AUDIOLINE SENSOR 500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AUDIOLINE SENSOR 500 19 페이지. Audioline sensor 500 initial setup
AUDIOLINE SENSOR 500에 대해서도 마찬가지입니다: 매뉴얼 (1 페이지), 초기 설정 매뉴얼 (1 페이지)

페이지 인쇄

SPEED-DIAL MEMORIES

Ten 'One-touch' speed dial memories are available. Memories 1 & 2, 6 & 7 have

been pre-programmed for easy access to and set of for select services. If

required these memories can be re-programmed with numbers of your own

choice following the procedure below.

Memroy 1 = Call waiting answer / Call hold

Memory 2 = Stop your telephone number being displayed for this call

Memory 6 = Program call foward always

Memory 7 = Turn Call foward always off

STORE NUMBER/NAME

1. Press

2. Dial the phone number to wish to store (16 digits maximum).

3. Press and release

4. Enter a (15 letters maximum) by pressing the relevant keypad digit buttons

once or several times (see page 13)

- If the same letter is you want to go to the next position press

- For edit, press

- To make a space, press 0.

5. Press and release the required speed-dial key to store the entry.

If you want to erase a speed-dial number, replace it with a new number.

DIALLING

1. Press and release the desired speed-dial key. The number is dialled

automatically.

2. Lift the handset when the other person answers (or use a headset).

It's also possible to lift the handset first and then press the speed-dial key.

SPEED-DIAL RINGER SOUND

When any of the numbers that are stored in the one touch memories call you,

an alternative ringer tone is heard, this feature allows you to distinguish between

callers, without looking at the display.