Audionet AMP III 소유자 매뉴얼 - 페이지 5

{카테고리_이름} Audionet AMP III에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Audionet AMP III 11 페이지. Three channel power amplifier
Audionet AMP III에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄

Wrong speaker polarization will result in severe loss of sound quality!

The nominal loudspeaker impedance must be 4 ohms or higher.

Although the AMP III has a protection circuit to prevent damage of the

system, switch off the unit while working on the loudspeaker cables.

Never use force or tools tightening the terminal screws!

For bi-wiring the loudspeakers with your Audionet AMP III please use

two loudspeaker cables and remove the "bridge" at the speaker terminals.

Insert the "tweeter" cable from the rear using banana plugs and mount the

"bass" cable from the side. In doubt please ask your dealer for assistance.

Headphones

A 6.3mm headphone jack is located on the rear of your AMP III. The

signal on this socket is permanently active and cannot be switched off.

Please be aware that listening music via headphones can seriously dam-

age your ears! The program can start suddenly!