Audionet AMP III Kullanıcı El Kitabı - Sayfa 5

Amplifikatör Audionet AMP III için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Audionet AMP III 11 sayfaları. Three channel power amplifier
Ayrıca Audionet AMP III için: Kullanıcı Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Wrong speaker polarization will result in severe loss of sound quality!

The nominal loudspeaker impedance must be 4 ohms or higher.

Although the AMP III has a protection circuit to prevent damage of the

system, switch off the unit while working on the loudspeaker cables.

Never use force or tools tightening the terminal screws!

For bi-wiring the loudspeakers with your Audionet AMP III please use

two loudspeaker cables and remove the "bridge" at the speaker terminals.

Insert the "tweeter" cable from the rear using banana plugs and mount the

"bass" cable from the side. In doubt please ask your dealer for assistance.

Headphones

A 6.3mm headphone jack is located on the rear of your AMP III. The

signal on this socket is permanently active and cannot be switched off.

Please be aware that listening music via headphones can seriously dam-

age your ears! The program can start suddenly!