aevit SMART-SHIFT 설치 매뉴얼 - 페이지 5

{카테고리_이름} aevit SMART-SHIFT에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aevit SMART-SHIFT 16 페이지.

CHRYSLER TOWN & COUNTRY / DODGE GRAND CARAVAN (2008+)

CABLE

BRACKET

Attach the Cable Bracket (included in KIT-SS-ASSY-

08C) to the end of the Smart Shift bracket in the

location shown in the figures above. The flat side of

the bracket should be facing away from the actuator.

Secure this bracket using the (2) provided #10-32 x

3/8" button head screws and a small amount of Blue

Loctite®.

Carefully insert the OEM shifter cable sleeve into the

Cable Bracket until the plastic ear snaps into the hole

in the Cable Bracket.

2008+

CHRYSLER /

DODGE

Carefully tap the hole in the Nose Cone to #8-32.

Verify the #8-32 x 3/8" shoulder screw (included in

KIT-SS-ASSY-08C) will thread properly into the Nose

Cone. Do not install the shoulder screw at this time.

After calibration (see Section 3), verify the cable is

in Park. Insert the shoulder screw through the OEM

cable end and into the Nose Cone as shown, using a

small amount of Blue Loctite®.

SMART-SHIFT INSTALLATION