audiophile Aurender N100 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} audiophile Aurender N100에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. audiophile Aurender N100 6 페이지.

The Aurender must be connected to your Local Area Network via Ethernet (CAT5 or

higher). In case there is no Ethernet connection available in the location where your

Aurender is to be installed, please see the following support article for other options:

What if I do not have an Ethernet/LAN connection in my listening room?

3. USB 2.0 data ports

The Aurender must be connected to your Local Area Network via Ethernet. In case

there is no Ethernet connection available in the location where your Aurender is to

be installed, please see the following support article for other options:

What if I do

not have an Ethernet/LAN connection in my listening room?

4. AC Power Switch

Press the rocker switch away from the AC power socket to turn AC power on, press

towards the AC power socket to turn it off. The rear panel power switch should be

used to turn the unit off only after the unit has been shut down via the front panel

On/Off button or via the app. The front panel On/Off button LED light will pulse

while the unit shuts down. Once it is dimly lit after shut down procedure is complete,

it is safe to flip the rear panel AC power switch to the "off" position. More information

on proper shut down procedure is found here: What is the proper way to shut down

my Aurender?

5. AC Power Socket

Connect an IEC AC Power cord to a grounded power source/outlet.