Audiophonics DA-S250NC 사용자 설명서 - 페이지 13

{카테고리_이름} Audiophonics DA-S250NC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Audiophonics DA-S250NC 14 페이지.
Audiophonics DA-S250NC에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)

페이지 인쇄

Settings

To enter the unit's configuration screen, press the Select button (17) on the remote control. Five settings appear on the screen (4). Use the Up (18) and Down (22)

navigation buttons on the remote control to select a setting. Press the Enter Button (19) on the remote control to enter the selected setting.

1. Max output level

This parameter allows to change the gain attenuation level of the amplifier and the DAC. The following settings are available :

1. 0dB (default)

2� ‑6dB

3� ‑12dB

4� ‑18dB

Note: The volume display on the screen does not reflect the use of this setting.

Example: If you select a gain attenuation level of -6dB and set the volume level to -30dB on the display, then the actual attenuation level is -36dB.

2. PCM filter

This parameter allows you to select a digital PCM filter to adjust the sound of the device. Four filters are available:

1. Apodizing Fast (default)

2. Fast linear

3. Slow linear

4. Fast minimum

Apodizing Fast (dB)

Fast Linear (dB)

Slow Linear (dB)

Fast Minimum (dB)