3xLogic VX-2A-B-IWD (R) 빠른 시작 매뉴얼 - 페이지 10

{카테고리_이름} 3xLogic VX-2A-B-IWD (R)에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3xLogic VX-2A-B-IWD (R) 13 페이지.

Your VISIX V-Series All-in-One camera can now be networked with other 3xLOGIC utilities and VIGIL suite

applications (VIGIL Client, VIGIL VCM, View Lite II(Android and iOS), 3xCLOUD, etc...) using only the camera's

VIGIL Connect Alias.

9 Adding a V-Series All-in-One Camera to VIGIL Client

Steps:

1).

To interface a VISIX All-in-One Camera with VIGIL Client, launch VIGIL Client (Local Mode only; VCM

mode will only display Servers from a networked VCM Server) and select Servers from the Servers top

menu. This will launch the Servers window. VISIX All-in-One devices are considered edge recording

devices, and thus are recognized as their own VIGIL Server within the VIGIL suite.

2).

Click Add. This will deploy the Add/Edit VIGIL Server window.

3).

Enable the Use VIGIL Connect option. If connecting using traditional network connection criteria is

desired, enter the cameras IP Address/DNS Name and confirm TCP/IP port status.

4).

Enter in the VIGIL Connect alias of the desired VISIX All-in-One camera (VIGILTest1 used in the below

example). Skip this step if using traditional network connection criteria (IP/Port).

5).

Click Test VIGIL Connect to confirm the camera can be communicated with through the Connect

system using the provided alias. Skip this step if using traditional network connection criteria (IP/Port).

6).

If the test is successful, then VIGIL Client can successfully communicate with the Server. Click OK at the

bottom of the Add Server window after configuring all required fields to save the new Server to VIGIL

Client. For more information on configuring VIGIL Servers, please see Section 5.1 of the

8.0 User

Guide.

10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC

VISIX Camera Quick Start Guide | VX-2A-B-IWD (R)

Figure 4-5: Adding All-in-One Camera to VIGIL Client

VIGIL Client