Consort CSL1LST 설치 및 제어 매뉴얼 - 페이지 3

{카테고리_이름} Consort CSL1LST에 대한 설치 및 제어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Consort CSL1LST 4 페이지. Sl wireless controlled low surface temperature fan heaters

페이지 인쇄

Operation

When the appliance is connected to the mains supply,

the LED indicator will light up green, showing that the

power is available to the unit.

When the heat output has been enabled by a

controller, the LED indicator light will turn red.

This heater can only be used in conjunction with any SL

wireless controller. Each SL controller can control any

number of heaters providing they are in the RF range.

Wall mounting

CSL1(M)LST

The heater must not be located immediately below a fixed socket outlet. The Wall Mounting bracket is packed

separately in the carton. Fit the top mounting brackets to the wall at the height and centers shown in the diagram.

Remove the two feet-securing screws from the base of the heater and use these screws to secure the right-angled

bracket to the base of the rear panel of the heater in the correct holes. These are the holes in the two protruding

lugs. Mount your appliance onto the top brackets via the two slots in the rear panel. Secure the bottom bracket to

the wall as shown.

SLPB

SLVTB

SL wireless controllers

Please refer to the SL user and operating instructions for

full operational details.

Top brackets

SLVT

SLTI

62001230 Iss 02