Consort CSL1LST Manual de instalação e controlo - Página 3
Procurar online ou descarregar pdf Manual de instalação e controlo para Aquecedor Consort CSL1LST. Consort CSL1LST 4 páginas. Sl wireless controlled low surface temperature fan heaters
Imprimir página
Operation
When the appliance is connected to the mains supply,
the LED indicator will light up green, showing that the
power is available to the unit.
When the heat output has been enabled by a
controller, the LED indicator light will turn red.
This heater can only be used in conjunction with any SL
wireless controller. Each SL controller can control any
number of heaters providing they are in the RF range.
Wall mounting
CSL1(M)LST
The heater must not be located immediately below a fixed socket outlet. The Wall Mounting bracket is packed
separately in the carton. Fit the top mounting brackets to the wall at the height and centers shown in the diagram.
Remove the two feet-securing screws from the base of the heater and use these screws to secure the right-angled
bracket to the base of the rear panel of the heater in the correct holes. These are the holes in the two protruding
lugs. Mount your appliance onto the top brackets via the two slots in the rear panel. Secure the bottom bracket to
the wall as shown.
SLPB
SLVTB
SL wireless controllers
Please refer to the SL user and operating instructions for
full operational details.
Top brackets
3
SLVT
SLTI
62001230 Iss 02