Dante DN1125A1 설치 및 운영 매뉴얼 - 페이지 8
{카테고리_이름} Dante DN1125A1에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dante DN1125A1 15 페이지. H.264/mpeg4/mjpeg ip box camera dual configurable video streams with duplex audio, data, alarms
Dante DN1125A1에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (15 페이지)
페이지 인쇄
D/O – Alarm Output
DN1126 provides 1 channel D/O (Alarm Output). It may be connected to either
voltage type sensor or relay type sensor as following Figure 6.
+5V
1
C
Figure 6. Digital Output Connection
Please pay attention to electric characteristics during installation.
RS-232C – will be replaced by RS-422/RS-485
RS-232C (new RS-422/RS-485) Terminal Block is used for some devices such as
POS terminal block.
<RS- 232C Application>
RX
TX
TX
RX
G ND
G ND
RX
TX GND
Figure 7. RS-232C (new RS-422/RS-485) Connection
Four (4) pin connector for audio In / Out
5
DN1126 has a mono audio input and a mono audio output. As the output power
for the audio is low, amplifier speaker is needed (Do not use a headphone or
earphone directly connected into the camera).
A out A in
Mic
Amp Speaker
Figure 8. 3 pin connector for audio in and out.