Dante DN1125A1 Installation And Operation Manual - Page 8
Browse online or download pdf Installation And Operation Manual for IP Camera Dante DN1125A1. Dante DN1125A1 15 pages. H.264/mpeg4/mjpeg ip box camera dual configurable video streams with duplex audio, data, alarms
Also for Dante DN1125A1: Installation And Operation Manual (15 pages)
Print Page
D/O – Alarm Output
DN1126 provides 1 channel D/O (Alarm Output). It may be connected to either
voltage type sensor or relay type sensor as following Figure 6.
+5V
1
C
Figure 6. Digital Output Connection
Please pay attention to electric characteristics during installation.
RS-232C – will be replaced by RS-422/RS-485
RS-232C (new RS-422/RS-485) Terminal Block is used for some devices such as
POS terminal block.
<RS- 232C Application>
RX
TX
TX
RX
G ND
G ND
RX
TX GND
Figure 7. RS-232C (new RS-422/RS-485) Connection
Four (4) pin connector for audio In / Out
5
DN1126 has a mono audio input and a mono audio output. As the output power
for the audio is low, amplifier speaker is needed (Do not use a headphone or
earphone directly connected into the camera).
A out A in
Mic
Amp Speaker
Figure 8. 3 pin connector for audio in and out.