Conspec Controls CN Series 운영 및 유지보수 매뉴얼 - 페이지 4

{카테고리_이름} Conspec Controls CN Series에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Conspec Controls CN Series 18 페이지. Universal transmitter

6 Guttman Boulevard, Charleroi Industrial Park, Charleroi Pennsylvania 15022

3.0 INSTALLATION INSTRUCTIONS

The Universal Transmitter is available in a NEMA 4X rated enclosure and a NEMA 7X rated

Explosion Proof enclosure for use in Classified Areas.

Locate a suitable location free of drips and drafts that allows the user to safely access the unit. The

Universal Transmitter shall be mounted so the detection head is pointing downward. Securely

mount the unit using industry approved methods and materials taking into account sound

mechanical and electrical practices.

It is the user's responsibility to follow all applicable Federal, State, Local Building and

Electrical Codes including NEC Guide Lines.

The Universal Transmitter Card is powered via a 3-conductor 18-22AWG shielded cable.

Power to the Universal Transmitter should be isolated from process power. The use of an isolated

power supply (Clean Power) is strongly recommended when the Universal Transmitter is part of a

personnel safety system. In most cases, building and electrical codes require the use of Conduit to

protect electrical wiring and prevent tampering. Conspec recommends electrical wiring to the

Universal Transmitter is placed in conduit.

The wiring diagram on the next page details the connection of V+, GND, and SIG on the terminal

labeled J2.

(800) 487-8450; Fax: (724) 489-9772

Page 4 of 17

http://www.conspec-controls.com